Machine Setup; Fitting The Brushes - Numatic TT 516B Notice Originale

Tipping the Machine

Fitting the brushes

Featuring the Nulock brush system.
The brush is fitted simply by pushing and twisting to lock in place, making fitting and removal a simple process.
Only use manufacturer supplied brushes.
This machine requires a 400mm brush or a 360mm pad.
6
7
Safety gloves are recommended for the changing of used brushes.
Machine Set-Up
0
L
Slide the brush / pad under the brush deck (Fig 6).
Fit the brush / pad onto the Nulock drive chuck, twist to lock
the brush / pad in place (Fig 7).
6
0
L
5
L