SKF TLMP 1008 Serie Mode D'emploi page 292

1. Safety instructions
1.10 Markings on the product
Warning of dangerous electrical
voltage, AC pumps only
Rotational direction of the pump
1.11 Notes related to the type identiica-
tion plate
The type identification plate states important
characteristics such as type designation, or-
der number, and regulatory characteristics.
To ensure that the loss of data due to an il-
legible type identification plate is avoided,
the characteristics should be entered in the
Instructions.
Model: _______________________________
P. No. ________________________________
S. No. ________________________________
Year of construction ____________________
24 VDC
SKF Maintenance Products
Model: TLMP 1018/24 DC
S. No.: XXXXXXXXXXX A
pmax: x bar / x psi
U: 24 VDC
P: 24 W
Kelvinbaan 16
3439MT Nieuwegein
The Netherlands
03/14
Made in Czech Republic
S. No.: XXXXXXXXXXX A
120 V AC
SKF Maintenance Products
Model: TLMP 1008/120 V
S. No.: XXXXXXXXXXX A
pmax: x bar / x psi
U: 120 VAC / 60 Hz Phase 1
P: 120 VA
Kelvinbaan 16
3439MT Nieuwegein
The Netherlands 03/14
Made in Czech Republic
S. No.: XXXXXXXXXXX A
240 V AC
SKF Maintenance Products
Model: TLMP 1008/240 V
S. No.: XXXXXXXXXXX A
pmax: x bar / x psi
U: 240 VAC / 50 Hz Phase 1
P: 240 VA
Kelvinbaan 16
3439MT Nieuwegein
The Netherlands 03/14
Made in Czech Republic
S. No.: XXXXXXXXXXX A
1.12 Notes related to the CE marking
CE marking is effected following the require-
ments of the applied directives:
○ 2014/30/EU
Electromagnetic compatibility
○ 2011/65/EU
(RoHS II) Directive on the restriction of
the use of certain hazardous substances
in electrical and electronic equipment
Reference on Low Voltage Directive
2014/35/EU
The protective regulations of Low Voltage
Directive 2014/35/EU are fulfilled according
to annex I (1.5.1) of Maschinery Directive
2006/42/EC.
Reference on Pressure Equipment Directive
2014/68/EU
Because of its performance data the product
does not achieve the limit values defined in
Article 4 (1) (a) (i) and is therefore excluded
from the scope of application of Pressure
Equipment Directive 2014/68/EU following
Article 4 (3).
EN EN
1
11