Intended Use; Foreseeable Misuse - SKF TLMP 1008 Serie Mode D'emploi

1. Safety instructions

1.3 Intended use

Supply of lubricants within a centralized lu-
brication system following the specifications,
technical data and limits stated in these
Instructions:
Usage is allowed exclusively for professional
users in the frame of commercial and eco-
nomic activities.

1.4 Foreseeable misuse

Any usage differing from the one stated in
these Instructions is strictly prohibited. It is
expressly forbidden:
○ outside the indicated operating tempera-
ture range
○ with non-specified means of operation
○ without adequate pressure relief valve
○ in continuous operation
○ In areas with aggressive or corrosive ma-
terials (e.g. high ozone pollution). These
may affect seals and painting.
○ in areas with harmful radiation (e. g. ioni-
sing radiation)
○ to supply, transport, or store hazardous
substances and mixtures in accordance
with annex I part 2-5 of the CLP regula-
tion (EG 1272/2008) and marked with
GHS01 - GHS06 and GHS08 hazard
pictograms.
○ Use to feed, forward, or store gases,
liquefied gases, dissolved gases, va-
pours, or fluids whose vapour pressure
exceeds normal atmospheric pressure
(1013 mbar) by more than 0.5 bar at
the maximum permissible operating
temperature.
1.5 Painting of plastic parts
Painting of any plastic parts or seals of the
described products is expressly prohibited.
Remove pump or completely tape plastic
parts of pump before painting the superior
machine
EN EN
1
9