Safety Instructions; General Behaviour When Handling The Product - SKF TLMP 1008 Serie Mode D'emploi

EN EN

1. Safety instructions

1.1 General safety instructions
○ The owner must ensure that safety infor-
mation has been read by any persons en-
trusted with works on the product or by
those persons who supervise or instruct
the before-mentioned group of persons.
In addition, the owner must also ensure
that the relevant personnel are fully fa-
miliar with and have understood the con-
tents of the Instructions. It is prohibited to
commission or operate the product prior
to reading the Instructions.
○ These Instructions must be kept for
further use.
○ The described products were manufactu-
red according to the state of the art. Risks
may, however, arise from a usage not ac-
cording to the intended purpose and may
result in harm to persons or damage to
material assets.
○ Any malfunctions which may affect safety
must be remedied immediately. In addi-
tion to these Instructions, general statu-
tory regulations for accident prevention
and environmental protection must be
observed.
8
1.2 General behaviour when handling the
product
○ The product may only be used in aware-
ness of the potential dangers, in proper
technical condition, and according to the
information in these instructions.
○ Familiarize yourself with the functions
and operation of the product. The spe-
cified assembly and operating steps and
their sequences must be observed.
○ Any unclear points regarding proper
condition or correct assembly/ operation
must be clarified. Operation is prohibited
until issues have been clarified.
○ Unauthorized persons must be kept
away.
○ Precautionary operational measures and
instructions for the respective work must
be observed.
○ Responsibilities for different activities
must be clearly defined and observed.
Uncertainty seriously endangers safety.
1. Safety instructions
○ Safety-related protective and emergency
devices must not be removed, modified
or affected otherwise in their function
and are to be checked at regular intervals
for completeness and function.
○ If protective and safety equipment has to
be dismantled, it must be reassembled
immediately after finishing the work, and
then checked for correct function.
○ Remedy occurring faults in the frame of
responsibilities. Immediately inform your
superior in the case of faults beyond your
competence.
○ Wear personal protective equipment.
○ Never use parts of the centralized lubri-
cation system or of the machine as stan-
ding or climbing aids.