Certification; Compliance With Standards; Eu Declaration Of Conformity; Transport And Storage - Pacojet Junior Mode D'emploi

Materials
11.

Certification

11.1

Compliance with standards

Please refer to insert.
11.2 EU declaration of conformity
(Copy of EU declaration of conformity)
12.

Transport and storage

12.1

Transport

Note
Damage due to improper transportation!
• Avoid jolts and impacts during transport.
• Avoid contamination, high temperatures, and moisture.
• Transport the device in its original packaging.
Before transporting the device, always complete the following steps:
1. Remove and empty the pacotizing beaker (10).
2. Perform a full cleaning cycle (see Chapter: "Cleaning"). Clean the accessories and
pack them away.
3. Switch off the device at the mains switch (5) and disconnect the connecting cable (6)
from the mains.
4. Secure any loose components (e.g., the connecting cable (6)).
5. Pack the device into its original packaging.
Pacotizing shaft and blade
holder (2)
Spray guard (8)
Standard pacotizing blade (9)
Pacotizing beaker (10)
Beaker lid (11)
Protective beaker (12)
Rinsing insert, green (13)
Blue sealing ring (14)
Cleaning insert, blue (15)
Stainless steel
Nitrile rubber, food safe
Cast steel
Stainless steel
Polypropylene, food safe
Polyamide
(15%, glass fiber reinforced)
Nitrile rubber, food safe
Nitrile rubber, food safe
Plastic
33
EN