Pacojet Junior Mode D'emploi page 18

Item Operating element
number
18 PORTION
QUANTITY
INDICATOR
19 READY DISPLAY
20 POWER DISPLAY
21 START KEY
Indicates how many portions will be pacotized before
the process starts (see also "PORTIONING KEYS").
If this indicator is dark, the entire pacotizing beaker (10)
will be processed.
Each finished processed portion is deducted from the
total on the indicator.
At the end of the pacotizing process, the number of
portions processed flashes.
If the programmed quantity is larger than the actual
quantity in the beaker, the quantity that still needs
to be pacotized will be displayed at the end of the
pacotizing process. This remaining quantity can be
processed once another pacotizing beaker is inserted
into the device.
If you do not wish to process any further portions, you
can delete the remaining quantity in the display using
the "STOP/RESET" KEY.
For certain types of error, this display may also
contain an Error message. (See Chapter "9. Defects" on
page 31).
Lights up when the protective beaker (12) has been
attached correctly to the device. The Pacojet Junior can
now be programmed and started.
The POWER DISPLAY has two functions.
1.) After it is switched on, the Pacojet Junior is in
"operating mode".
The device can now be programmed.
2.) If no action is taken within 5 minutes (i.e., no buttons
are operated or processes initiated), the device
switches to "standby mode" and the display lights
up RED.
The START KEY has two functions.
1.) Switches the device from "standby mode" to
"operating mode".
2.) Starts the device once programming is complete.
Function
13
EN