Cleaning Agents; Initial Cleaning Process - Pacojet Junior Mode D'emploi

EN
8.1.2

Cleaning agents

Note
Risk of damage caused by the use of unsuitable cleaning agents.
• Never use foaming cleaning agents.
• Never use harsh, corrosive cleaning agents (risk of dissolving aluminum, plastic, and
rubber components).
For the best possible hygienic cleaning results, always use a non-foaming disinfectant that has
been approved for use with food.
The following cleaning agent is an example of a product suitable for cleaning the Pacojet Junior:
• Steinfels Easy MIC alkaline.
Please contact your PACOJET sales point or your official PACOJET service partner for
information about suitable cleaning agents.
8.1.3

Initial cleaning process

The Pacojet Junior and its accessories must be cleaned before the device is used for the
first time.
Thoroughly rinse the accessories (spray guard (8), pacotizing blade (9), pacotizing beaker (10),
beaker lid (11), protective beaker (12), rinsing insert (green) (13), blue sealing ring (14), and
cleaning insert (blue) (15) with hot water using a commercially available washing-up liquid.
After cleaning, remove any leftover cleaning agent.
Furthermore, a complete cleaning cycle is also mandatory (see "8.1.5 Cleaning cycle" on
page 27).
Caution
Risk of injury caused by unsuitable cleaning agents.
Using the wrong type of cleaning agents may lead to
the food in the processor being contaminated with toxic
substances.
• Never use foaming cleaning agents.
• Never use harsh, corrosive cleaning agents.
• Never use toxic cleaning agents.
24