Pacojet Junior Mode D'emploi page 25

EN
6.
7.
20
Select the number of portions you wish to process.
Use the PORTIONING KEYS (23) for this purpose.
See also Chapter "5.3 Display" on page 12.
Remember that the device needs to be in "operating
mode" (see "START KEY" on page 13).
Start the pacotizing process by pressing the START
KEY (21).
The motor starts and sets the pacotizing shaft, blade
holder (2), and pacotizing blade (9) in motion.
You can track the pacotizing blade's vertical motion
using the UP/DOWN DISPLAY (17).
Any portions already processed are indicated by the
flashing BEAKER CONTENTS INDICATOR (16).
Unprocessed portions are represented by a bar that
is lit up continuously.
Once the pacotizing process is complete,
the pacotizing shaft and blade holder (2) retracts
with the pacotizing blade to the start position and
comes to a stop. The motor switches off.
If necessary, the pacotizing process
can be interrupted or halted at any
time by operating the RESET/STOP
key (22). In this case, the pacotizing
shaft (2) retracts to the start position.
See also Chapter "5.3 Display" on page 12.