Bosch rexroth APAS CT-H Manuel D'utilisation page 39

Fig. 5: Connection of the connection cable in the control cabinet (left) / plug and pin defi nition of the SSKU (right)
1 I/O line connected to PCB:X1
2 Plug X6 of the connection cable connected to
X3 of the SSKU
Commissioning, operation and decommissioning | APAS test device CT-H
5 Commissioning,
operation and
decommissioning
Commissioning and decommissioning of the APAS test device is performed
by a commissioning specialist for the APAS test device CT-H or a system
integrator according to section 2.4. The self-test and operation of the
APAS test device for use as test equipment is performed by a system
integrator according to section 2.4.
5.1 Commissioning
3 Terminal X7 of the connection cable connected
to the grounding strap of the SSKU
4 Supply line with plug X8 for connection to
the handle
3 842 562 818, edition 08.2021, Bosch Rexroth AG
17/22