4/22
APAS test device CT-H | About this documentation
Bosch Rexroth AG, edition 08.2021, 3 842 562 818
1 About this
documentation
1.1
Validity of the documentation
This document applies to the following product:
• APAS test device CT-H (3 842 563 057)
The documentation is intended for qualifi ed personnel who use the
product as part of an acceptance test of the "Sensor skin" protective
equipment of the APAS assistant robot system.
Read the user manual completely.
Observe the safety instructions before working with the product.
This user manual is part of the product and must be available
at all times. When selling the product, this documentation must be
handed on.
1.2
Presentation of information
Standardized safety instructions, symbols, terms and abbreviations are
used so that you can use this documentation to work quickly and safely
with your product. These are explained in the following sections to help
you understand them better.
1.2.1 Safety instructions
This document and, if applicable, also the device, includes safety
instructions before courses of action or a required action whenever
there is a risk of injury or property damage. Be sure to observe all
safety precautions.
Safety instructions are set out as follows:
SIGNAL WORD
Type and source of danger
Consequences of non-compliance
Measures to prevent danger
• Warning sign: Points out the danger
• Signal word: Indicates the severity of the danger
• Type and source of danger: Indicates the type and source of danger
• Consequences: Describes the consequences of non-compliance
• Prevention: States how the danger can be avoided