Bosch rexroth APAS CT-H Manuel D'utilisation page 27

About this documentation | APAS test device CT-H
Table 1: Types of risk according to ANSI Z535.6-2006
Warning sign, signal word
DANGER
WARNING
CAUTION
NOTICE
1.2.2 Symbols
The following symbols indicate important information that is not
safety-relevant but increases the comprehensibility of the documentation.
Table 2: Meaning of the symbols
Symbol Meaning
If this information is not observed, the product cannot be used and/or
operated as designed.

Single, independent action
1. Numbered steps:
The numbers indicate that the action steps are sequential.
2.
3.
1.2.3 Safety markings
In this documentation, and also on the device if necessary, the following
warning signs are used for health and safety notices when there is a risk
of injury.
Table 3: Meaning of the safety markings
Symbol Meaning
Dangerous electrical voltage
Observe instructions
Low-voltage external ground
Meaning
Indicates a hazardous situation that
will result in severe injury or death
if not avoided.
Indicates a hazardous situation that
may result in severe injury or death
if not avoided.
Indicates a hazardous situation that
may result in minor to moderate injury
if not avoided.
Property damage: The product or the
surrounding area could get damaged.
3 842 562 818, edition 08.2021, Bosch Rexroth AG
5/22