Publicité
Les langues disponibles
Les langues disponibles
Chapter 3
Automatic Configuration - DHCP
By default, the Router's Internet Connection Type is set
to Automatic Configuration - DHCP, which should be
kept only if your ISP supports DHCP or you are connecting
through a dynamic IP address. (This option usually applies
to cable connections).
Internet Connection Type > Automatic Configuration - DHCP
Static IP
If you are required to use a permanent IP address to
connect to the Internet, select Static IP.
Internet Connection Type > Static IP
Internet IP Address
This is the Router's IP address, as
seen from the Internet. Your ISP will provide you with the
IP Address you need to specify here.
Subnet Mask
This is the Router's Subnet Mask, as seen
by users on the Internet (including your ISP). Your ISP will
provide you with the Subnet Mask.
Default Gateway
Your ISP will provide you with the IP
address of the ISP server.
DNS 1-3
Your ISP will provide you with at least one DNS
(Domain Name System) server IP address.
PPPoE
Some DSL-based ISPs use PPPoE (Point-to-Point Protocol
over Ethernet) to establish Internet connections. If you are
connected to the Internet through a DSL line, check with
your ISP to see if they use PPPoE. If they do, you will have
to enable PPPoE.
Internet Connection Type > PPPoE
Username and Password
Password provided by your ISP.
Service Name
If provided by your ISP, enter the Service
Name.
Wireless-N Broadband Router with Storage Link
Enter the Username and
Advanced Configuration
Connect on Demand: Max Idle Time
the Router to cut the Internet connection after it has been
inactive for a specified period of time (Max Idle Time). If
your Internet connection has been terminated due to
inactivity, Connect on Demand enables the Router to
automatically re-establish your connection as soon as you
attempt to access the Internet again. To use this option,
select Connect on Demand. In the Max Idle Time field,
enter the number of minutes you want to elapse before
your Internet connection terminates. The default Max Idle
Time is 15 minutes.
Keep Alive: Redial Period
the Router will periodically check your Internet
connection. If you are disconnected, then the Router
will automatically re-establish your connection. To use
this option, select Keep Alive. In the Redial Period field,
you specify how often you want the Router to check
the Internet connection. The default Redial Period is
30 seconds.
PPTP
Point-to-Point Tunneling Protocol (PPTP) is a service that
applies to connections in Europe only.
Internet Connection Type > PPTP
If your ISP supports DHCP or you are connecting through
a dynamic IP address, then select Obtain an IP Address
Automatically. If you are required to use a permanent IP
address to connect to the Internet, then select Specify an
IP Address. Then configure the following:
Specify an IP Address
This is the Router's IP address,
•
as seen from the Internet. Your ISP will provide you
with the IP Address you need to specify here.
Subnet Mask
This is the Router's Subnet Mask, as
•
seen by users on the Internet (including your ISP). Your
ISP will provide you with the Subnet Mask.
Default Gateway
Your ISP will provide you with the
•
IP address of the ISP server.
DNS 1-3
Your ISP will provide you with at least one
•
DNS (Domain Name System) server IP address.
You can configure
If you select this option,
5
Publicité
