Cisco LINKSYS WRT160NL Guide De L'utilisateur page 30

Chapter 3
MAC Address
QoS > MAC Address
Enter a Name Enter a name for your device.
MAC Address Enter the MAC address of your device.
Priority Select the appropriate priority: High, Medium
(Recommend), Normal or Low.
Click Add to save your changes. Your new entry will appear
in the Summary list.
Ethernet Port
QoS > Ethernet Port
Ethernet Select the appropriate Ethernet port.
Priority Select the appropriate priority: High, Medium
(Recommend), Normal or Low.
Click Add to save your changes. Your new entry will appear
in the Summary list.
Voice Device
QoS > Voice Device
Enter a Name Enter a name for your voice device.
MAC Address Enter the MAC address of your voice
device.
Priority
Select the appropriate
(Recommend), Medium, Normal or Low.
Click Add to save your changes. Your new entry will appear
in the Summary list.
Summary
This lists the QoS entries you have created for your
applications and devices.
Priority This column displays the bandwidth priority of
High, Medium, Normal or Low.
Wireless-N Broadband Router with Storage Link
Name
port name.
Information
MAC address entered for your entry. If a pre-configured
application or game was selected, there will be no valid
entry shown in this section.
Remove
Edit
Click Save Settings to apply your changes or click Cancel
Changes to cancel your changes.
Administration > Management
The Administration > Management screen allows the
network's administrator to manage specific Router
functions for access and security.
Management
Router Access
To ensure the Router's security, you will be asked for your
password when you access the Router's web-based utility.
The default setting is admin.
High
priority:
Router Password
Re-enter to confirm
confirm.
Local Management Access
Access via
communications protocol used to connect to servers on
the World Wide Web. HTTPS uses SSL (Secured Socket
Layer) to encrypt data transmitted for higher security.
Select HTTP or HTTPS. HTTP is the default setting.
Advanced Configuration
This column displays the application, device or
This column displays the port range or
Click this button to remove an entry.
Click this button to make changes.
Administration > Management
Enter a new password for the Router.
Enter the password again to
HTTP (HyperText Transport Protocol) is the
26