Cisco LINKSYS WRT160NL Guide De L'utilisateur page 17

Chapter 3
WPA Enterprise
This option features WPA used with a RADIUS server. (This
should only be used when a RADIUS server is connected
to the Router).
Security Mode > WPA Enterprise
Encryption
WPA supports two encryption methods, TKIP
and AES, with dynamic encryption keys. Select the type of
algorithm, TKIP or AES. The default setting is TKIP.
RADIUS Server
Enter the IP address of the server.
RADIUS Port
Enter the port number of the server. The
default value is 1812.
Shared Secret
Enter the key shared between the Router
and the server.
Key Renewal Enter a Key Renewal period, which instructs
the Router how often it should change the encryption
keys. The default value is 3600 seconds.
WPA2 Enterprise
This option features WPA2 used with a RADIUS server. (This
should only be used when a RADIUS server is connected
to the Router).
Security Mode > WPA2 Enterprise
Encryption
WPA2 supports two encryption methods,
TKIP and AES, with dynamic encryption keys. Select the
type of algorithm, AES or TKIP or AES. The default setting
is TKIP or AES.
Wireless-N Broadband Router with Storage Link
Advanced Configuration
RADIUS Server Enter the IP address of the server.
RADIUS Port Enter the port number of the server. The
default value is 1812.
Shared Secret
Enter the key shared between the Router
and the server.
Key Renewal Enter a Key Renewal period, which instructs
the Router how often it should change the encryption
keys. The default value is 3600 seconds.
RADIUS
This option features WEP used with a RADIUS server. (This
should only be used when a RADIUS server is connected
to the Router).
IMPORTANT: If you are using WEP, then each
device in your wireless network MUST use the
same WEP encryption method and key, or else
the network will not function properly.
Security Mode > RADIUS
RADIUS Server Enter the IP address of the server.
RADIUS Port Enter the port number of the server. The
default value is 1812.
Shared Secret
Enter the key shared between the Router
and the server.
Encryption Select a level
40/64 bits (10 hex digits) or 104/128 bits (26 hex digits).
The default setting is 40/64 bits (10 hex digits).
Passphrase
Enter a Passphrase to automatically generate
WEP keys. Then click Generate.
Key 1-4 If you did not enter a Passphrase, enter the WEP
key(s) manually.
TX Key
Select which TX (Transmit) Key to use. The default
value is 1.
of WEP encryption,
13