Cisco LINKSYS WRT160NL Guide De L'utilisateur page 42

Appendix B
4. In the Group Name field, create a name for the group.
5. In the Description field, enter keywords to describe the
group.
6. From the Access drop-down menu, select the
appropriate level of access: read and write or read
only.
Create to apply your changes, or click Cancel to
7. Click
clear your changes. Click Close to exit the screen and
return to the Administration screen.
Create a User Account
1. Click the Storage tab.
2. Click the Administration tab.
Storage > Administration
User Management section, click Create New
3. In the
User.
User Account
4. In the Name field, create a name for the user.
5. In the Full Name field, enter the actual name of the
user.
Wireless-N Broadband Router with Storage Link
How to Install and Access USB Storage
6. In the Description field, enter keywords to describe the
user.
7. In the Password and Confirm Password fields, enter the
password that the user will use to login.
8. From the Group Member drop-down menu, select the
appropriate user group.
NOTE:
To temporarily disable an account,
select Account Disabled.
Create User to apply your changes, or click
9. Click
Cancel to clear your changes. Click Close to exit the
screen and return to the Administration screen.
38