PROGRAMME PROGRESSION
Stimulation starts properly once the stimulation intensity has been increased.
The examples below explain the general rules. Depending on the programme, there may be slight differences.
1
Time remaining (in minutes and seconds) until the end of a programme
2
The duration bar showing the duration of the contraction and duration of active rest is only shown during the work sequence
3
Session sequences
4
Warm-up
5
Work period
6
Relaxation
A Press the on/off button to temporarily interrupt the programme. To resume, simply press the +/- button of channel 4. The
session will resume at 80% of the intensity level being used before it was interrupted.
B C D E The various intensities reached during the contraction phase are shown by a series of black vertical bars; the intensities
of the rest phase are illustrated by hatched bars.
Please note that the stimulation intensities for the active rest phase are automatically set to 50% of the contraction intensities. They
can be changed during the rest phase. Once changed, they are completely independent of the contraction intensities.
4
5
6
3
1
A
B
C
12
2
D
E
EN