To memorise a 3-button io bidirectional remote control (Telis io, Impresario Chronis io, etc.), ensure that the remote control has memorised the system key
(see page 17).
[1]. Press and hold the "ProG" button (2 s) on the programming interface.
The screen displays "f0".
Note: pressing "ProG" again allows the next function to be memorised.
[2]. Press "ProG" at the rear of the 3-button remote control to memorise the
function.
The screen displays "add".
memorising by copying a previously memorised 3-button io remote control
ClEariNG thE rEmotE CoNtrols aNd all sEttiNGs
Clearing individual buttons on the keytis io or keygo io remote controls
This can be done:
• by memorising via the programming interface.
Memorising a button which has already been memorised will clear this button's function.
• by clearing directly on the remote control (only on Keytis io remote controls).
Press the "ProG" button and the buttoN to be cleared on the remote control together.
Clearing the memorised remote controls
Causes all memorised remote controls and the memorised system key to be cleared.
Note: On Keytis io remote controls, repeat the direct clearing procedure described above for all of the memorised remote control buttons.