Memorising The Remote Controls - SOMFY GDK 700 Notice D'installation Et D'utilisation

2 Programming
> Unlocking the parameters menu
WARNING
The keypad for setting the parameters is locked to ensure the safety of the users. The parameters must only be unlocked
and adjusted by a professional drive and home automation installer. Making any changes which do not comply with these
instructions could risk personal injury or damage to property.
from non-compliance with these instructions.
If the parameters menu is locked and no memorised remote control is available, it will be necessary to
1
• Press and hold
"A" .

2.4 Memorising the remote controls

> Memorising the remote controls for operation in "Total opening" mode
Button 1
1
• Press "B" for 2 seconds.
The integrated lighting comes on.
20
EN - GDK installation and operating guide - SOMFY
2
• Without releasing button "A", press a button on a remote
control which is already memorised. The integrated lighting
Button 2
Somfy cannot be held responsible for any damages resulting
• Release
• Button 1 on the remote controls supplied in the kit has
already been memorised.
• If this procedure is carried out using a button
which has already been memorised, the button will be
cleared.
2
• Press the on the remote control
•
The remote control button has been memorised.
3
"A".