Safety Requirements; Symbols Used; Symbols Used In The Manual; Symbols On The Labels - Faro ALYA Mode D'emploi

1. SAFETY REQUIREMENTS

Dear Client,
FARO hopes you enjoy your work with the new high quality light. For safe work and to take
full advantage of the performance of the product, carefully read this manual before using the
device. In particular, follow all the warnings and the notes given.
1.1

1.1.1 Symbols used in the manual

The paragraphs marked with this symbol contain instructions that must be carefully followed
to avoid damaging the device, harming the operator or the patient.
These instructions warn you that you must pay attention to avoid situations that could
damage the device.
This icon highlights what you should not do to avoid damaging the device.
This icon supplies information that allows you to use the device more efficiently.

1.1.2 Symbols on the labels

The data plate is fixed:
• for the complete light: on the rear arm
• for the head: under the heat sink cover
and outlines the following data:
Serial Number (SN): year (YY) / range of origin (LD for dental light - TE for head only)
plus the progressive number (NNNNNN) e.g.: SN14LD000001 for the complete light SN
14TE000001 for the head.
The following standardised symbols are also present:
!
95°C 203°F
SN
135°C 275°F
105°C 221°F
ON
36

SYMBOLS USED

WARNING
WARNING
FORBIDDEN
NOTES
Read the use instructions. Supply electricity
Manufacturing symbol pursuant to Directive 93/42/EEC
The use instructions include safety warnings
WEEE equipment in compliance with the Directive 1012/19/EC. Dispose of
he product in compliance with this directive.
Double insulation. Class 2 device against electrical risk
Serial Number
Can be sterilised with humid heat at 134°C
Use the device at a temperature between 10°C and 40°C
Use the device at pressure between 800mbar and 1060mbar
Use the device at relative humidity between 30 RH and 75RH
Symbol to adjust light intensity
Symbol to switch on the light
OFF
[Symbol to switch on/off the light on the rear arm]