CEILING MOUNTING
R. Slip - from the top - inside the column (14) a
traction cord.
S. Connect the lamp conductor to the traction cord.
T. Fit the lamp on the column (14) and fix it with the
three screws (19); make sure the bores of the
bushing (20) match the screws seat on the column (14)
and tighten. Simultaneously pull the traction cord
to push out the conductor of the lamp from the
column fixing flange (7) of about 200 mm.
U. Connect the lamp conductor to the terminal board
(6) (see electrical diagrams).
V. Verificare la perpendicolarità della colonna agendo
sui dadi (9).
W. Stringere i dadi (12) e le rondelle (11) per fissare
la flangia (7), rendendola indipendente dalle guide
di fissaggio (23).
X. Far aderire la plafoniera (16) al soffitto, spingen-
dovi contro l'anello (15).
WIRING DIAGRAM
CEILING MOUNTING WITHOUT transformer
Input cable terminal
Power supply
Earthing
12-24 Vac
17-33 Vdc
Application
19
C
14
20
11
23
12
Yellow – green
Main supply
-
OL
12
51 51