Table Top On The Base - Mizuhosi 5803 Manuel Du Propriétaire

4.12 Table Top on the Base

It may be desirable to store a table top on a collapsed 5803 Advanced Control Base.
The table top storage bracket is an optional accessory and can be ordered from
customer service.
1. Remove the table top from H-frame.
2. Retract the base (refer to section 4.11).
3. If the head end H-frame is in the H-frame storage bracket, remove it and attach
to the head end crossbar.
4. Attach the table top storage bracket (optional accessory) to the foot end crossbar
using the gold handle.
5. Using the hand control, depress trendelenburg button which will raise the foot
end column to its highest position.
6. Place the coupling device of the table top in the head end H-frame storage
bracket.
7. Place the table top on the table top storage bracket on the foot end crossbar.
8. Unplug the power cord and store it on the cord wrap.
9. Push the foot end of the table toward the head end of the table until the foot end
is retracted to its minimum length.
The base and table top are now ready for storage.
MIZUHOSI 2009
22
NW0498 Rev E