Spare And Wearing Parts - Bosch SMT 300 Notice Originale

en 34 | SMT 300 | Maintenance
8. Maintenance
!
Work on electrical equipment is only to be per-
formed by persons with sufficient knowledge and
experience of electrical systems!
8.1 Cleaning
!
Do not use abrasive cleaning agents and coarse
workshop cloths!
¶
The housing and the LCD are only to be cleaned
using a soft cloth and neutral cleaning agents.
8.2 Maintenance
!
Empty the SMT 300 before sending for servicing, as
otherwise the oil can drain out.
|
1 689 989 261 2019-04-08
8.3 Changing the battery in the
multi-function lamp
1 2
Fig. 10: Multi-function lamp (components)
1 Multi-function key
2 Housing
3 Battery holder with microbatteries (3 x AAA)
4 Cover
1. Unscrew the cover from the housing
2. Remove the battery holder with microbatteries from
the housing.
3. Remove old batteries from the battery holder.
4. Insert new microbatteries (3 x AAA) in the direction
shown on the insides of the openings in the battery
holder.
5. Insert the battery holder into the housing in accor-
dance with the direction shown by the arrow on the
holder.
6. Screw the rear cover onto the housing.
i
For disposal of the old batteries from the multi-func-
tion lamp, see sec. 9.3.
8.4

Spare and wearing parts

Designation
Smoke supply hose (2,5 m) with Delrin® nozzle
UltraTraceUV® smoke solution
Connector cap kit
Adapter cone
Smoke diffuser
Multi-function lamp (incl. UV safety goggles
and 3 microbatteries)
UV safety goggles
EVAP service port connector, standard size
Schrader removal/installation tool
Fuel filler neck:
– Universal adapter
– BMW Mini adapter
Wearing part
<)
xxx
3 4
Order number
1 680 703 080
<)
F 00E 900 348
<)
1 680 322 069
1 681 334 039
1 681 390 002
1 687 550 077
1 682 777 092
1 683 457 130
<)
1 687 012 181
<)
1 681 335 125
1 681 335 126
Robert Bosch GmbH