Spare And Wearing Parts; Notes On Malfunctions; Warnings And Notes On Faults - Bosch MOT 240 Instructions D'emploi

9.

Spare and wearing parts

Designation
Trigger clamp-on pickup, complete
Secondary connecting cable
Secondary connection set "plus"
(3x, rot/+)
Secondary sensor (1x, rot/+)
Secondary connection set "minus"
(3x, schwarz/-)
Secondary sensor (1x, schwarz/-)
Stroboscope, complete
Oil temperature sensor
Battery connecting cable B+, B-, complete 1 684 460 156
connecting clamps B+, B- (connecting set) 1 687 011 059
Primary connecting cable (terminals 1/15)
black banana plug,
with color grommet: green, yellow, blue
connecting clip
green grommet
yellow grommet
Multi measuring cable, complete
black banana plug
with color grommet: green, yellow, blue
red banana plug, with color grommet:
yellow
2 black measuring prods
2 black measuring clips
Push button
Safety fuse 2 A/250 V (time-lag fuse)
(only for MOT 250/251) (<)
(<) = wearing part
10.
10.1
Part number
Warning:
1 687 224 736
A warning describes a malfunction which in the most of cases can
1 687 463 274 be suppressed or which does not influence the continuation of the
program steps, e.g.: „engine type entered: incorrect" or „no
signal from the trigger clamp-on pickup of cylinder 1". The
warnings are represented with inverted symbols in the status line
1 687 224 849
on the right. To understand better these symbols, you can press
1 687 224 837
the information key and after the warning is indicated in clear text.
With the exception of the following warning:
1 687 224 848
1 687 224 834
1 687 022 338
1 687 230 039
With the information key, you get the following information
concerning the malfunctions:
1 684 460 157
(URIT = voltage, resistance, current, temperature)
1 687 011 155
This indication is treated as a malfunction which must be suppres-
1 681 354 017
sed by the after-sales Service Bosch.
1 680 306 154
1 680 306 155
The measuring functions independent of URIT are still available.
1 684 460 155
Malfunctions:
1 687 011 155
A malfunction is a perturbation which causes the indication of a
1 687 011 156
malfunction and which prevents the correct operation of the
MOT.
1 684 485 034
The malfunctions of this type are detected during the autotest and
they are edited as malfunction indication of the system in the
1 684 480 022
introduction menu (section 4).
All malfunction indications are edited in parallel through the
1 680 583 047
printer interface.
1 904 522 343
If a malfunction occurs during a test, with various tests, it is
checked if the malfunction is permanent or if it is a sporadic
perturbation coming from outside. This processing may take
15 seconds. In case of malfunction, the following indication
appears:
In the most of cases, the malfunction indications of the system
give notice of a hardware fault which must be suppressed by the
after-sales Service Bosch.

Notes on malfunctions

Warnings and notes on faults

U R
I T
Error in the system: ERROR AV-XX-X
The URIT measurement is not available.
ERROR AV-XX-X
93