Dust Filter; Retention System; Storing The Helmet; Accessories And Spare Parts - Touratech AVENTURO MOD Manuel D'utilisation

G. MAINTENANCE AND CARE

6. DUST FILTER

1. Take dust filter out from behind the chin ventilation.
2. Rinse out the dust filter with cold water and, if necessary, use a
mild soapy solution. Let the dust filter dry at room temperature.
3. Re-insert after drying.

6. RETENTION SYSTEM

The metal components of the retention system do not require mainte-
nance.

7. STORING THE HELMET

Store the helmet in the helmet bag supplied in a dry, well-ventilated and
stable place. Always position the helmet so that it cannot fall to the floor.
Damage that occurs in this way is not covered by the warranty.
Note:
Store the helmet out of the reach of children and animals.
100
H. ACCESSORIES AND SPARE PARTS

1. COMMUNICATION SYSTEMS

Your AVENTURO Mod is supplied ready for installation of the
SCHUBERTH SRC-System™ as standard. The AVENTURO Mod is
already fitted with two integrated antennas to amplify reception and
a Bluetooth ® connection, to provide you with the best possible radio
reception.
You can find out more about the SCHUBERTH SRC-System™ from
your specialist dealer and at WWW.TOURATECH.COM
Integrated antennas for optimal
radio reception
Plug for connection with the
SRC-System™
EN
Bluetooth ® antenna
101