Additional Safety Features; Putting On The Helmet - Touratech AVENTURO MOD Manuel D'utilisation

C. THE HELMET

16. ADDITIONAL SAFETY FEATURES

ANTI-ROLL-OFF SYSTEM (A.R.O.S.)
The anti-roll-off system specially developed by SCHUBERTH ensures
that, if the chinstrap is fastened and correctly adjusted
a) the helmet cannot pivot off the head
from behind,
b) the risk of contact between the chin
section of the helmet and the chin or
neck of the rider is minimised due to
the low angle of tilt and
c) the consequences of the helmet
hitting the rib cage as the result of an
accident are reduced.
REFLECTIVE PANELS
Together with the silver reflective strips located laterally at the back of
the neck collar, the two reflective panels integrated into the left and right
areas under the face shield help make the motorcycle rider more notice-
able on the road, especially in conditions of poor visibility. If the helmet is
plain (no decoration), the Touratech name also appears on the front and
back of the helmet in a reflective film.
Note:
Keep the reflective safety areas clean.
Note:
When riding in France, local law requires that further reflective
safety stickers be attached to the front, back and both sides of the
helmet.
88
D. PUTTING ON THE HELMET AND TAKING IT OFF
Note:
Please note the information on the handling of the chin strap.

1. PUTTING ON THE HELMET

1. Open and lock the chin bar. Make sure the sun visor is retracted
into the helmet shell.
2. Open the chinstrap and chinstrap comfort pad.
3. Pull apart the lower ends of the chinstrap.
4. It will now be easy to put the helmet on.
5. Fasten the chinstrap.
6. Make sure the chinstrap passes under the chin and fits snugly.
7. Swing the chin bar down until you hear both locks close.
8. Check that the chin section is securely locked by pressing it up
from below.
Caution:
Never ride with the chin bar raised!
EN
89