Wind Deflector; Chin Bar - Touratech AVENTURO MOD Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
C. THE HELMET

8. WIND DEFLECTOR

The wind deflector is shortened to a minimum in order to provide
enough fresh air, even in off-road use. The additional wind deflector,
when mounted, prevents unwanted inrush of wind into the helmet while
driving. Additionally, the anti-noise pad can help reduce noise levels in
the helmet.
The additional wind deflector is attached to the
inside of the acoustic collar with the help of the
Velcro strap, and it can be removed if desired to let
in additional fresh air in warm weather.
Tip:
The fit of the bottom of the helmet is extremely important in
ensuring that the helmet is as quiet as possible. If you have a
smaller neck size, we recommend that you also wear a scarf.

9. CHIN BAR

The AVENTURO Mod is equipped with a chin bar that pivots up and can
be easily opened and closed by means of the operating element located
in the middle of the chin bar. The movement of the section required for
this is optimised for convenient, smooth operation.
LOCK SYSTEM
The chin section is equipped with a specially developed lock system on
the left and the right side. The construction design of the lock system is
similar to the door lock systems used in car design. Despite there being
locks on both sides, the chin section opens with only one button. The
lock in the opposite side is simultaneously operated by bowden cable.
The mechanically optimised system reduces the force need to operate
the two locks to a comfortable 16 N, although the safety-relevant overall
locking force is many times this amount.
62
OPERATION
The chin bar can be opened at any time irrespective of the position of
the visor or sun visor. The stiff, positive engagement at the end of travel
ensures the chin bar remains safely in place when raised.
OPENING THE CHIN BAR
1. Open the chin bar by sliding the red
button located in the middle of the
chin zone forwards in the direction
of the arrow as far as it will go, using
your thumb.
2. The Bowden cable mechanism will
then release both locks and you
can pivot the chin section up to its
uppermost locking position.
Note:
The AVENTURO Mod's chin bar mechanism is equipped with a
safety feature which prevents the chin bar from opening of its own
accord in the event of a fall, so when opening it you should also
grip the chin bar with one hand.
Note:
The positioning of the shield is aligned with the opening for the chin
section to guarantee optimal movement of the chin section.
EN
63

Publicité

Table des Matières
loading

Table des Matières