Face Shield With Integrated Anti-Fog Lens - Touratech AVENTURO MOD Manuel D'utilisation

C. THE HELMET

12. FACE SHIELD WITH INTEGRATED ANTI-FOG LENS

The face shield is a fog-free double-lens visor. By fixing the inner
anti-fog lens using eccentric pins, the two visor panes are pre-tensioned
together and are thereby sealed. An insulating air cushion is thus formed
between the visor's main plate – i.e. the outer plate – and the inner
plate, which prevents any fogging up of the inner plate.
COATING
The main plate has a HighClear anti-scratch coating on both sides.
®
Note:
The helmet should never be used to hold gloves or any other
objects as this may damage the scratch-sensitive anti-fog lens.
Note:
The anti-fog lens is supplied with a protective film. Remove this film
before using the helmet for the first time.
Note:
The anti-fog lens may only be used in conjunction with the main
face shield that has been specially designed for this purpose. Other
face shields must not be fitted.
68
OPENING THE FACE SHIELD
To open the face shield, use your thumb
to push the face shield up using one of
the finger tabs situated to the left and
right of the face shield, and move it to the
desired position.
Face shield (including urban position)
The face shield can be locked in any one of seven positions. The second
position (urban position) locks in place more firmly, providing greater
resistance when the face shield is in this position. This makes it easier to
lock the face shield in the urban position, especially while riding.
• When you push the face shield open, it may well travel beyond the
urban position
• but it is easy to find this position by moving it downwards again.
The face shield mechanism requires no additional lubrication. The
face shield can be operated at any time irrespective of the position
of the sun visor.
CLOSING THE FACE SHIELD
To close the face shield, grip the finger tabs at top
left and right and press the face shield down with
one movement until it audibly locks into place.
EN
69