Touratech AVENTURO MOD Manuel D'utilisation page 41

C. THE HELMET
3. Reinsert the neck collar by first
inserting the guide pins into the
front plugs and sockets on the lower
helmet edge on both sides and then
mount the neck collar piece by piece
into the guide gap.
DISMANTLING THE CHEEK PAD
1. Undo the snaps on the front straps
of the neck collar and pull the neck
collar out of the mounting by pulling
strongly inwards.
80
2. Remove the cheek pad by pulling the
three snaps out of the red plugs and
sockets.
3. Unzip the zipper.
4. Thread the chinstrap out of the
A.R.O.S. strap and pull this
sideways. Pull the neck strap
rearwards out of the cheek pad.
5. Repeat points 2 to 4 to dismantle the
cheek pad on the other side.
EN
81