Configuration; Default Ip Address; Web Interface; First Access To The Web - Videotec MAXIMUS MVXHD Manuel D'instructions

6 Configuration

6.1 Default IP address

The unit is configured to obtain an IP
address from a DHCP server.
The IP address acquired via DHCP is visible in the
DHCP server log file.
If the DHCP server is not available, the unit
automatically configures itself with a self-generated
IP address in the 169.254.x.x/16 subnet. Configuring
the IP address of the PC as belonging to the same
subnet (example: IP address: 169.254.1.1, subnet
mask: 255.255.0.0).
Use an ONVIF compliant VMS or a network sniffer to
find the IP address of the device (IP scan utility).

6.2 Web interface

Browsers supported (the latest version):
Microsoft Edge, Google Chrome, Mozilla
Firefox.
6.2.1 First access to the web pages
The first operation in configuring the device consists
in connecting to the web interface.
To access the web interface of the product, simply
use a browser to connect to http://ip_address.
On first access, the Home page will be displayed.
To configure the web interface, consult the manual
relating to the firmware version installed, available on
the product web page of the website www.videotec.
com.

7 Accessories

For further details on configuration and
use, refer to the manual of the relevant
accessory or support.
8
8 Instructions for normal
operation

8.1 Enabling the wiper (Wiper)

Do not use the wiper if the outside
temperature is below 0°C (+32°F) or in case
of ice.
To activate or deactivate this function, refer to the
manual of the control device used or consult the
manual relating to the firmware version installed
(Web Interface manual).

8.2 Enabling the washer (Washer)

To activate or deactivate this function, refer to the
manual of the control device used or consult the
manual relating to the firmware version installed
(Web Interface manual).
MNVCMVXHDBCAM_2222_EN