9.1.2 How to move around the menus
Each page of the OSM shows a list of parameters
or sub-menus that can be selected by the operator.
Move the cursor with the joystick (up and down) to
scroll the various parameters .
ADVANCED
------------------------
1 ZOOM SPEED
2>DIGITAL ZOOM
3 WIDE DYNAMIC
4 HIGH RESOLUTION:
5 BACKLIGHT COMP.:
6 FOCUS
7 EXPOSURE
8 INFRARED
9 WHITE BALANCE
Fig. 35
The symbol > at the end of a line indicates the
presence of a specific submenu. To enter the
submenu just confirm the menu item. To exit the
submenu use the Exit function (Zoom Wide).
ADVANCED
------------------------
1 ZOOM SPEED
2>DIGITAL ZOOM
3 WIDE DYNAMIC
4 HIGH RESOLUTION:
5 BACKLIGHT COMP.:
6 FOCUS
7 EXPOSURE
8 INFRARED
9 WHITE BALANCE
Fig. 36
26
:
7
:
N
:
Y
N
Y
>
>
>
>
:
7
:
N
:
Y
N
Y
>
>
>
>
9.1.3 How to modify the parameters
Move the cursor to the parameter to be changed and
confirm. The field will start flashing, indicating that it
is in change mode. Use the joystick (up and down) to
show the possible options.
ADVANCED
------------------------
1 ZOOM SPEED
2>DIGITAL ZOOM
3 WIDE DYNAMIC
4 HIGH RESOLUTION:
5 BACKLIGHT COMP.:
6 FOCUS
7 EXPOSURE
8 INFRARED
9 WHITE BALANCE
Fig. 37
Confirm after having identified the option required.
ADVANCED
------------------------
1 ZOOM SPEED
2>DIGITAL ZOOM
3 WIDE DYNAMIC
4 HIGH RESOLUTION:
5 BACKLIGHT COMP.:
6 FOCUS
7 EXPOSURE
8 INFRARED
9 WHITE BALANCE
Fig. 38
The field will stop flashing to confirm the selection
made.
:
7
:
N
:
Y
N
Y
>
>
>
>
:
7
:
N
:
Y
N
Y
>
>
>
>
MNVCUCZ_1511_EN