Masking Menu; Masking Menu (Edit Masks); How To Create A New Mask - Videotec Ulisse Compact Manuel D'instructions

Masquer les pouces Voir aussi pour Ulisse Compact:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 158

8.1.9.3 Masking Menu

Dynamic masking allows the creation of up to a
maximum of 24 masks so as to obtain the masking of
certain areas defined by the user.
Masks are defined in space and take account of the
horizontal, vertical and zoom depth position when
making the settings.
The unit automatically maintains the position and
dimension of the masking, based on the displayed
area.
It is possible to simultaneously display up to 8 masks.
If the device is used at maximum speed, video signal
updating times become critical and it is necessary to
create masks larger than the object so that it remains
masked for longer during the passage and therefore
cannot be seen.
To ensure full functionality, the tilt position
of the masks must always be between -70
and +70 degrees; in addition , the size of
the mask must be double the size of the
object to be masked (both height-wise and
width-wise).
It allows you to configure the following parameters:
Mask Colour: Allows you to choose the colour
1.
of the masks.
Edit Masks: Allows access to the Edit Masks
2.
submenu and set the dynamic masking
parameters.
MASKING
------------------------
1>COLOUR :
2 EDIT MASKS
Fig. 45
MNVCUCT_1511_EN
BLUE
>

8.1.9.4 Masking Menu (Edit Masks)

It allows you to configure the following parameters:
1.
Mask Number: Allows you to choose the mask
on which to operate.
2.
Enable Mask: Enables or disables the selected
mask.
Edit Mask: Allows the creation or editing of a
3.
mask.
EDIT MASK
------------------------
1>MASK NUMBER
2 ENABLE MASK
3 EDIT MASK
Fig. 46
Selecting the option Edit Mask in the menu makes it
possible to set new values for the selected mask.

8.1.9.5 How to create a new mask

Choose a disabled mask by selecting Mask Number
from the Edit Masks menu. Select Edit Mask to edit it (
Fig. 46, page 29).
In the following example we shall mask a flower.
• Press the Iris Close button to pass from Masking
mode to Move Camera mode.
MASK 1
Edit Mask: ON
Iris Close→ PTZ enabled
Fig. 47
:
1
:
N
>
29

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ulisse compact thermal

Table des Matières