Housing Opening; Housing Board Description; Slide Removal - Videotec MAXIMUS MMX Manuel D'instructions

6.3 Housing opening

Before carrying out any type of
intervention, read the "Safety rules"
chapter of this manual.
Unscrew the fastening screws and remove the front
cover from the housing body.
Screws properties
• Diameter/Screw pitch: M5x0.8
• Material: A4
• Screw head: ISO 4762
• Length: 8mm (0.3in)
• Yield stress (min): 450N/mm²
Fig. 18

6.4 Slide removal

Unscrew the 3 M4 screws to remove the slide.
Before removing the slide, check that cables are not
fastened with a clip.
Fig. 19
18

6.5 Housing board description

BOARD DESCRIPTION
Connector/ Function
Terminal
J1 Power supply line (24Vac/24Vdc)
J4 Heater
J5 Board test
J6 Blower
J7 Connection to the video encoder
J8 Ethernet, PoE+ power supply
F1 Fuse
SW1 Reset dip-switch
Tab. 5
F1 J1 J8
Fig. 20
J6 J4
J5 J7 SW1
MNVCMMX_2223_EN