12.2 Opening and closing the
camera
To carry out some maintenance operations, the
camera must be opened.
Carefully remove the front slide. Pay
attention not to damage the internal
connection cables.
Unscrew the closure screws and remove the slide
connected to the front of the camera.
Fig. 42
To close the camera, follow the inverse procedure.
Pay attention to the fixing. Tightening
torque: 4.5Nm (±0.5Nm).
26
12.3 Camera board description
BOARD DESCRIPTION
Connector/
Function
Terminal
F1
Fuse
SW1
Reset dip-switch
Tab. 7
F1
Fig. 43
SW1
MNVCNVX_2110_EN