Managing Incontinence And Drainage; Activating And Resetting Cpr - Stryker 2971 Isolibrium Manuel D'utilisation

English
Positioning a patient on the support surface (Continued)
EN
To position the patient:
1. Max Inflate the support surface.
2. Position the patient in the center of the support surface, align the patient's head toward the head board
4 on page 1-14).
3. Check the patient frequently during Lateral Rotation for proper positioning and support surface inflation
5 on page 1-14
Figure 1-5: Correct patient positioning

Managing incontinence and drainage

WARNING
Always monitor the patient condition at regular intervals for patient safety.
You can use disposable diapers or incontinence pads to manage incontinence. Always provide appropriate skin care
after each incontinence episode.

Activating and resetting CPR

When you activate for CPR, the system deflates and the InTouch control display will change.
WARNING
Always make sure that the operator has access to the CPR straps.
To activate for CPR, pull the red CPR strap straight out from the support surface
straps are located on the left and right side of the foot end of the support surface. You can activate either one or both
CPR straps.
1-14
and Figure 1-6 on page 1-14).
Figure 1-4: Center the patient
Operation
Figure 1-6: Incorrect patient positioning
2971-209-001 REV B
(Figure 1-
(Figure 1-
(Figure 1-7 on page 1-15). The CPR
www.stryker.com