Contact Information; Serial Number Location - Stryker 2971 Isolibrium Manuel D'utilisation

English
Specifications (Continued)
EN
Electrical requirements
Power cord
Low Air Loss flow rate
Leakage current
Noise level
Stryker reserves the right to change specifications without notice.
Environmental conditions
Ambient temperature
Relative humidity (non-condensing)
Atmospheric pressure
See the InTouch manual for bed specifications.

Contact information

Contact Stryker Customer Service or Technical Support at: 1-800-327-0770.
Stryker Medical
3800 E. Centre Avenue
Portage, MI 49002
USA
To view your operations or maintenance manual online, see https://techweb.stryker.com/.
Have the serial number (A) of your Stryker product available when calling Stryker Customer Service or Technical
Support. Include the serial number in all written communication.

Serial number location

The serial number (A) for your support surface is located on the patient right side of the foot box on the specification
label. Unzip the support surface top cover (see
1-6
Introduction
ANSI/AAMI ES60601-1:2005/(R)2012
and A1:2012, C1:2009/(R)2012 and
A2:2010/(R)2012
CAN/CSA-C22.2 No. 60601-1 (2008)
3 foot, 16 AWG cord with hospital grade plug for use with the InTouch foot end
auxiliary power outlet
100 LPM
300 uA Maximum
50 dBA maximum
Operation
86 °F
(30 °C)
50 °F
(10 °C)
75%
30%
1060 hPa
700 hPa
Cover replacement, top on page
2971-209-001 REV B
120VAC 50/60Hz, 2.5A
Storage and transportation
140 °F
(60 °C)
-40 °F
(-40 °C)
95%
10%
1060 hPa
500 hPa
1-20).
www.stryker.com