Stryker 2971 Isolibrium Manuel D'utilisation page 32

English
(Continued)
EN
Rated maximum output power of
transmitter
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in
meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
Note: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
Isolibrium is suited for use in the electromagnetic environment specified below. The customer or the user of
Isolibrium should make sure that it is used in such an environment.
Immunity Test
1-24
EMC Information
W
150 kHz to 80 MHz
d=[3.5/V1]√P
0.12
0.38
1.2
3.8
12
IEC 60601 Test Level
Separation distance according to frequency of transmitter
80 MHz to 800 MHz
d=[3.5/E1]√P
0.12
0.38
1.2
3.8
12
Compliance Level Electromagnetic Environment - Guidance
2971-209-001 REV B
m
800 MHz to 2.5 GHz
d=[7/E1]√P
0.23
0.73
2.3
7.3
23
www.stryker.com