Table des Matières
Publicité
ENGINE OIL REPLACEMENT
7. If the oil filter is to be replaced during this
oil change, remove the following parts and
reinstall them.
Replacement steps:
• Remove the oil filter element cover 1 and
oil filter element 2.
• Check the O-rings 3, if cracked or dam-
aged, replace them with a new one.
• Install the oil filter element and oil filter ele-
ment cover.
8. Install:
• Copper washer 1
• Oil strainer (frame) 2
• Oil hose 3
• Bolt (oil hose) 4
• Oil hose clamp 5
• Lower engine bracket
9. Install:
• Copper washer
• Oil filter element drain bolt
• Crankcase oil drain bolt
• Frame oil drain bolt
10. Fill:
• Engine oil
11. Check:
• Oil leakage
12. Install:
• Oil tank cap
13. Check:
• Engine oil level
3 - 16
INSP
ADJ
Oil filter element cover:
10 Nm (1.0 m • kg, 7.2 ft • lb)
70 Nm (7.0 m · kg, 50 ft · lb)
8 Nm (0.8 m · kg, 5.8 ft · lb)
2 Nm (0.2 m · kg, 1.4 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
20 Nm (2.0 m · kg, 14 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
Oil quantity:
Periodic oil change:
1.0 L (0.88 Imp qt, 1.06 US qt)
With oil filter replacement:
1.1 L (0.97 Imp qt, 1.27 US qt)
Total amount:
1.2 L (1.06 Imp qt, 1.27 US qt)
Publicité
Table des Matières
