Table des Matières
Publicité
HANDLEBAR
EC5B5000
ASSEMBLY AND INSTALLATION
Handlebar
1. Install:
• Handlebar 1
• Handlebar upper holder 2
• Bolt (handlebar upper holder) 3
NOTE:
• The handlebar upper holder should be
installed with the punched mark a forward.
• Install the handlebar so that the marks b are
in place on both sides.
• First tighten the bolts on the front side of the
handlebar upper holder, and then tighten the
bolts on the rear side.
2. Install:
• Left grip 1
Apply the adhesive to the handlebar 2.
NOTE:
• Before applying the adhesive, wipe off
grease or oil on the handlebar surface a
with a lacquer thinner.
• Install the left grip to the handlebar so that
the line b between the two arrow marks
faces straight upward.
5 - 44
CHAS
28 Nm (2.8 m · kg, 20 ft · lb)
Publicité
Table des Matières
