Table des Matières
Publicité
5
6
1
2 3
4
4 - 18
CARBURETOR
15. Install:
• Jet needle 1
• Collar 2
• Spring 3
• Needle holder 4
• Throttle valve plate 5
To throttle valve 6.
16. Install:
• Throttle valve assembly 1
• Screw (throttle shaft) 2
NOTE:
Install the valve lever rollers 3 into the slits a
of the throttle valve.
17. Install:
• O-ring 1
• Valve lever housing cover 2
• Bolt (valve lever housing cover) 3
18. Install:
• Carburetor breather hose 1
NOTE:
Install the carburetor breather hoses to the
carburetor so that the hoses do not bend near
where they are installed.
Accelerator pump timing adjustment
Adjustment steps:
NOTE:
In order for the throttle valve height a to
achieve the specified value, tuck under the
throttle valve plate 1 the rod 2 etc. with the
same outer diameter as the specified value.
Throttle valve height:
0.9 mm (0.035 in)
ENG
Publicité
Table des Matières
