Operator Position; Main Operating Parts - Corghi Artiglio Master 26” MI Manuel D'utilisation

A - fig. 7 shows the position the operator occupies during the various working phases.
The display for setting and displaying the wheel data, the control console and the pedal
control unit are all on the same side of the machine. This defines the working position of
the operator using the machine. The operator must only work on the wheel and use the
machine's controls from this one position.
In these conditions all tyre changing operations are carried out and overseen by the
operator, who checks that everything is proceeding properly and is ready to step in at
the slightest problem.

MAIN OPERATING PARTS

WARNING
Get to know your machine: the best way to prevent accidents and obtain top perfor-
mance is to know exactly how it works. Learn the function and location of all controls.
Check carefully that all the machine's controls are working correctly. To avoid accidents
and injury, the machine must be installed properly, operated correctly and serviced
regularly.
The machine's main operating parts are shown in fig. 8a and fig. 8b.
1 Body
2 Wheel lift (optional accessory).
3 Support (optional accessory).
4 Centring handle (device for clamping the wheel to the self-centring turntable).
5 Mobile tool (for demounting the tyre).
6 Tool head.
7 Fixed tool (for mounting the tyre).
8 Supporting structure.
9 Top bead breaker disc.
10 Display for setting and displaying the wheel data - see fig. 9a and relative description
in CONTROLS section.
11 Top bead breaker disc release lever.
12 Control console - see fig. 9b and relative description in CONTROLS section.
13 Bottom bead breaker disc.
14 Self-centring turntable (rotating device to which the wheel is clamped).
15 Pedal control unit - see fig. 9c and relative description in CONTROLS section.
16 Rim rest for demounting/mounting closed centre rims (optional accessory).
17 Relief valve (max. pressure 12 bar) (in T.I. versions only).
18 Filter Regulator + Lubricator unit (unit which regulates, filters, dehumidifies and
lubricates the compressed air supplied).
19 Grease container
20 Doyfe union (union for connection to the wheel valve for inflation).
21 Bead presser gripper.
22 Air tank (in T.I. versions only).
23 Nameplate
50

Operator position

Artiglio Master operator's manual