Type 8791
Electricalconnection
13
elecTrical cOnnecTiOn
All electrical inputs and outputs of the device are not galvanically isolated from the supply voltage.
13.1
safety instructions
DangEr!
risk of electric shock.
▶ Before working on equipment or device, switch off the power supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for electrical equipment.
Warning!
risk of injury from improper installation.
▶ Installation may be carried out by authorized technicians only and with the appropriate tools.
risk of injury from unintentional activation of the system and an uncontrolled restart.
▶ Secure system from unintentional activation.
▶ Following installation, ensure a controlled restart.
13.2
electrical connection with circular plug-in
connector
if as-interface:
The designation of the circular plug-in connector and the contacts can be found in chapter "15
AS-Interface".
13.2.1 Designation of the circular plug-in connector
Operating voltage
and diverse signals
2
3
4
5
M12, 8-pole plug
Figure 32:
Designation of the circular plug-in connector and contacts
1
8
7
6
Functional earth FE
english
59