Functions - Burkert 8791 Manuel D'utilisation

7.4.2 functions ii
• Activation and parameter setting via communications software
additional function
Standard signal for set-point value
INPUT
Effective direction of the actuator
DIR.ACTUATOR
Signal split range
SPLITRANGE
Mechanical stroke range limit
X.LIMIT
Opening and closing time
X.TIME
Position controller
X.CONTROL
Safety position
SAFEPOSITION
Signal level fault detection
SIGNAL ERROR
Binary input
BINARY INPUT
Analog output
OUTPUT
Reset
RESET
Table 3: Functions II
20
english
Type 8791
Function
effect
Select set-point value standard signal.
Assignment of the aeration state of the actuator chamber
to the actual position.
Standard signal as % for which the valve runs through the
entire mechanical stroke range.
Limit the mechanical stroke range.
Limit the control speed.
Parameterize the position controller.
Definition of the safety position.
Configuration of signal level fault detection.
Configuration of the binary input.
Configuration of the analog output (optional).
Reset to factory settings.