Service; Accessories; Communications Software; Usb Interface - Burkert 8791 Manuel D'utilisation

Type 8791

Service

16 serVice
If the positioner type 8791 is operated according to the instructions in this manual, it is maintenance-free.
17

accessOries

CauTion!
risk of injury and/or damage by the use of incorrect parts.
Incorrect accessories and unsuitable replacement parts may cause injuries and damage the device and the sur-
rounding area.
▶ Use only original accessories and original replacement parts from Bürkert.
The order numbers of the attachment kits for linear or rotary actuators as well as for the matching cable
plugs of the multipole version of the positioner can be found in the data sheet for type 8791.
Designation
M12 connection cable, 8-pole
USB adapter with interface driver for connection to a PC in conjunction with
an extension cable
Communicator / Pactware and DTM
Table 39: Accessories
17.1 communications software
The PC operating program "Communicator" is designed for communication with the devices from the Bürkert
positioner family (basic models without display). Devices constructed since August 2014 support the full range of
functions. If you have any questions regarding compatibility, please contact the Bürkert Sales Center.
A detailed description and precise schedule of the procedure for the installation and operation of the
software can be found in the associated documentation.
17.1.1 usB interface
The PC requires an USB interface for communication with the positioner as well as an additional adapter with
interface driver (see "Table 39: Accessories").
The data transfer must be according to HART specification.

17.1.2 Download

Download the software: www.burkert.com
Order no.
919061
227093
Information at www.burkert.com
english
69