Type 8791
AS-Interface
15
as-inTerface
15.1
as-interface connection
AS-Interface (Actuator Sensor Interface) is a field bus system which is used primarily for networking binary sensors
and actuators (slaves) with a higher-level control (master).
Bus line
Unshielded two-wire line (AS-Interface line as AS-Interface cable harness) along which both information (data) and
energy (supply voltage for the actuators and sensors) are transmitted.
network topology
Freely selectable within wide limits, i.e. star, tree and line networks are possible. Further details
describe the AS-Interface specification (A/B slave model conforms to the version 3.0 specification).
15.2
Technical data for as-interface pcBs
Version S-7.3.4 profile
Supply
via AS-Interface
Outputs
16 bit set-point value
Inputs
-
Certificate no. 87301
Certification
according to version 3.0
Table 31:
Technical data
15.3
programming data
I/O configuration
ID code
Extended ID code 1
Extended ID code 2
Profile
Table 32:
Programming data
Version S-7.3.4 profile
7 hex
3 hex (analog profile)
F hex
(Default value, can be changed by the user)
4 hex
S-7.3.4
Version S-7.A.5 profile
via AS-Interface
16 bit set-point value
16 bit feedback
Certificate no. 95401
according to version 3.0
Version S-7.A.5 profile
7 hex
A hex
7 hex
5 hex
S-7.A.5
english
65