Configuration Of The Keys - Burkert 8791 Manuel D'utilisation

9.3.1 configuration of the keys
The configuration of the 2 keys inside the housing varies depending on the operating status (AUTOMATIC / MANUAL).
The description of the operating status (AUTOMATIC / MANUAL) can be found in the chapter entitled
"9.2 Operating status".
Figure 10: Description of the keys
MANUAL operating status (DIP switch 4 set to ON):
Key Function
1
Aerate
(manually open / close the actuator)
2
Deaerate
(manually open / close the actuator)
No function if the binary input was activated with the "MANUAL / AUTOMATIC change-over" via the communications
4)
software.
Depending on the control function of the actuator.
5)
Table 7: Configuration of the keys for MANUAL operating status
AUTOMATIC operating status (DIP switch 4 set to OFF):
Key Function
1 Press for 5 seconds to start the X.TUNE function
2 -
Table 8: Configuration of the keys for AUTOMATIC operating status
28
4)
4)
english
Type 8791
Operating
Key 1
Key 2
5)
5)