Burkert 8791 Manuel D'utilisation page 49

Masquer les pouces Voir aussi pour 8791:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Type 8791
Attachmentandassembly
Figure 22:
Assembling the lever
The gap between the driver pin and the axle should be the same as the drive stroke. This results in the
ideal angular range of the lever of 60° (see "Figure 23").
angular range of the position sensor:
The maximum angular range of the position sensor is 180°.
rotational range of the lever:
To ensure that the position sensor operates at a good resolution, the rotational range of the lever must be
at least 30°.
The rotational movement of the lever must be within the position sensor angular range of 180°.
The scale printed on the lever is not relevant.
180°
Maximum rotational
range of the lever
Figure 23:
Rotational range of the lever
Attach lever to the axle of the positioner and screw tight (
17
16
12
6
19
22
13
5
4
15
18
14
12
The swivel movement of the lever must be
within the position sensor slewing range of
180°.
and
).
english
49

Publicité

Table des Matières
loading

Table des Matières