Aligning Lever Mechanism - Burkert 8791 Manuel D'utilisation

Type 8791
Attachmentandassembly
attaching the positioner with mounting bracket for actuators with columnar yoke:
→
Attach mounting bracket to the columnar yoke with the U-bolt
(see "Figure 26").
Figure 26: Attach positioner with mounting bracket; for actuators with columnar yoke
11.2.4 aligning lever mechanism
The lever mechanism cannot be correctly aligned until the device has been connected electrically and
pneumatically.
→
Move the actuator in manual mode to half stroke (according to the scale on the actuator).
→
Adjust the height of the positioner until the lever is horizontal.
→
Fix the positioner in this position on the actuator.
⑦
21
10
11
7
⑪ ⑩
, washers , circlips and hexagon nuts
english
21
51