11.2.2 installation
Warning!
risk of injury from improper installation.
▶ Installation may be carried out by authorised technicians only and with the appropriate tools.
risk of injury from unintentional activation of the system and an uncontrolled restart.
▶ Secure system from unintentional activation.
▶ Following assembly, ensure a controlled restart.
procedure:
→
Using the bracket
actuator spindle.
Figure 21:
Attaching the hoop
→
Select short or long lever according to the stroke of the actuator
(see "Table 21: Attachment kit for linear actuators" part no. 6a/6b).
→
Assemble lever (if not pre-assembled) "Figure 22".
48
②
③
the clamping pieces
2
16
17
english
⑰
, hexagon bolts
and circlips
3
Type 8791
Attachmentandassembly
⑯
attach the hoop to the