Symbols On The Measurement Module; Proper Use - HBM QuantumX Manuel D'emploi

MX403B
2.1.1

Symbols on the measurement module

Take details in the operating manual into account
Read and comply with the operating manual.
2.2

Proper use

The MX403B voltage measurement module fits perfectly
into the modular QuantumX series and is solely used to
measure high differential voltages or differential voltages
at high potential to remote ground, within the ratings
stated in the specifications.
The device is not intended for use as a safety compo­
nent. Please also refer to the section: "Additional safety
precautions".
Proper and safe operation requires proper transportation,
correct storage, siting and mounting, and careful opera­
tion.
Everyone involved with siting, starting up, or operating
the measurement module must have read and under­
stood the operating manual and in particular the technical
safety instructions.
In the interests of safety, the measurement module
should only be operated by qualified personnel (see
below) and as described in the operating manual. It is
also essential to comply with the legal and safety require­
ments for the application concerned during use. The
same applies to the use of accessories.
A3757-2.2 HBM: public
7