Accessories - HBM QuantumX Manuel D'emploi

5

Accessories

Article
AC/DC power supply /
24 V
Cable - QuantumX
supply
Ethernet crossover
cable
22
The MX403B voltage measurement module is specified
according to EN 61010 for 600 V CAT III or 1000 V
CAT II. Only accessories approved for at least this cate­
gory can be used and connected to the measuring con­
nections. Only devices that comply with the require­
ments of IEC 61010­1, 61010­2­030 and IEC 60950 may
be connected.
The recommended HBM 1­NTX001 accessory meets the
requirements of IEC / EN / DIN EN 60950­1 regarding a
SELV power supply. The direct current supply of the
MX403B must be a SELV voltage supply that meets the
requirements of IEC / EN / DIN EN 60950­1. The supply
voltage must be protected where applicable by a suitable
DC fuse (e.g. LITTELFUSE KLKD 6, LFPHV001).
General accessories
Description
Input: 100 - 240 V AC ("10%),
1.5 m cable
Output: 24 V DC, max. 1.25 A,
2 m cable with ODU plug
3 m cable for voltage supply of QuantumX
modules; suitable plug (ODU Medi-Snap
S11M08-P04MJGO-5280) at one end and
exposed wires at the other
Ethernet crossover cable for direct opera­
tion of devices on a PC or notebook, length
2 m, type CAT5+
A3757-2.2 HBM: public
Order No.
1-NTX001
1-KAB271-3
1-KAB239-2
MX403B